Adapter for Vent-Matic Faucet Spout

Dave Greenbaum

South Jersey FC Member
I'm looking for something that will take the place of the spout of a 2015 Vent-Matic faucet that will mate to a 1/4" Flare nut. Also possible would be having a shank output, to which I would attach a tail piece that has a 1/4" MFL. Chi Company had something like this called a Perlick/Vent-Matic cleaning adapter, but they seem to have dropped off the face of the Earth. The problem is that the spout has non-standard threads. Here are the measurements:
vent-matic-spout-adapter.png
I've been to APR Supply and they don't have anything like this. They recommended I talk to a machine shop. Any suggestions?
 
I'm looking for something that will take the place of the spout of a 2015 Vent-Matic faucet that will mate to a 1/4" Flare nut. Also possible would be having a shank output, to which I would attach a tail piece that has a 1/4" MFL. Chi Company had something like this called a Perlick/Vent-Matic cleaning adapter, but they seem to have dropped off the face of the Earth. The problem is that the spout has non-standard threads. Here are the measurements:
View attachment 275
I've been to APR Supply and they don't have anything like this. They recommended I talk to a machine shop. Any suggestions?

Dave are you cleaning or dispensing?
 
Dave are you cleaning or dispensing? I was wondering if Intertap/Nukatap adapters would fit. They don't have one that goes to flare but theydo have one that goes to Ball lock. That could get you hooked up to a cleaning keg or beer gun or whatever. I have some of Intertap attachments if you want to try one for size.
 
Hey John, I'm trying to connect to a beer gun without having to swap QDs or drop the keg pressure to fill the occasional bottle or two.
 
I’ve never seen the vent-matic. I’d try what Chris offered above. Intertap has a couple of screw in options.

I think this was your considered plan B.

 
Last edited:
Back
Top